|
旺特(東莞)工程塑膠原料有限公司企業(yè)會(huì)員第13年
資料未認(rèn)證
保證金未繳納
|
||||||||||||||||||||||||||||||
| Typical Properties | Method | Value | Unit |
| Physical | |||
| Density | ISO 1183 | 0.9 | g/cm³ |
| Melt flow rate (MFR) (230°C/2.16kg) | ISO 1133 | 22 | g/10 min |
| Mechanical | |||
| Tensile Modulus | ISO 527-1, -2 | 1150 | MPa |
| Tensile Stress at Yield | ISO 527-1, -2 | 23 | MPa |
| Tensile Strain at Break | ISO 527-1, -2 | >50 | % |
| Tensile Strain at Yield | ISO 527-1, -2 | 13 | % |
| Impact | |||
| Charpy notched impact strength | ISO 179 | ||
| (23 °C, Type 1, Edgewise, Notch A) | 22 | kJ/m² | |
| (-20 °C, Type 1, Edgewise, Notch A) | 4.0 | kJ/m² | |
| Notched izod impact strength | ISO 180 | ||
| (+23 °C, Type 1, Notch A) | 22 | kJ/m² | |
| (0 °C, Type 1, Notch A) | 5.9 | kJ/m² | |
| (- 20 °C, Type 1, Notch A) | 4.3 | kJ/m² | |
| Ductile/Brittle transition temperature | ISO 6603-2 | -46 | °C |
| Thermal | |||
| Heat deflection temperature B (0.45 MPa) Unannealed | ISO 75B-1, -2 | 88 | °C |
| Vicat softening temperature A/50 | ISO 306 | 127 | °C |
| Vicat softening temperature B/50 | ISO 306 | 58 | °C |
| Optical | |||
| Gloss (60°) | ASTM D 2457 | 100 | % |
