韓國工程POM Kepital F30-03 產(chǎn)品特性：低粘度，高流動性，表面成型好，適合薄壁產(chǎn)品用
我公司提供的產(chǎn)品均為正牌塑膠原料，品質保證，貨源穩(wěn)定，送貨上門，可免費提供官方物性表、UL黃卡，并隨貨提供RoHS報告、SGS報告等，索取權威資料請致電13268582149

POM F30-03 物性表：

Specific Gravity	1.41	g/cm³	ASTM D792
Density	1.41	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	27	g/10 min	ASTM D1238
Melt Mass-Flow Rate (MFR)	28	g/10 min	ISO 1133
Molding Shrinkage - Flow (3.00 mm)	2.0	%	ASTM D955
Molding Shrinkage (3.00 mm)	2.0	%
Water Absorption (Equilibrium, 23°C, 60% RH)	0.22	%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield, 23°C)	62.0	MPa	ASTM D638
Tensile Stress (Yield, 23°C)	65.0	MPa	ISO 527-2
Tensile Elongation (Break, 23°C)	40	%	ASTM D638
Nominal Tensile Strain at Break	25	%	ISO 527-2
Flexural Modulus (23°C)	2650	MPa	ASTM D790
Flexural Modulus (23°C)	2700	MPa	ISO 178
Flexural Strength (23°C)	91.0	MPa	ASTM D790
Flexural Strength (23°C)	90.0	MPa	ISO 178
Shear Strength (2.00 mm)	55.0	MPa	ASTM D732
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength	5.5	kJ/m²	ISO 179
Notched Izod Impact (3.20 mm)	59	J/m	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	80		ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	158	°C	ASTM D648
Deflection Temperature Under Load (1.8 MPa, Unannealed)	110	°C	ASTM D648
Heat Deflection Temperature (1.8 MPa, Unannealed)	101	°C	ISO 75-2/A
CLTE - Flow (20 to 80°C)	0.00013	cm/cm/°C	ASTM D696
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+16	ohms	ASTM D257
Surface Resistivity	1.0E+16	ohms	IEC 60093